Item: CHN Elemental Analyzer ASTM D5373
Model: YX-CHN5000
Technical parameters
1. Measurement range:
Cad: 50ppm or 0.005%-100%
Had: 200ppm or 0.02%-50%
Nad: 80ppm or 0.008%-50%
2. Accuracy:
Cad: 0.5%
Had: 0.15%
Nad: 0.08%
3. Single sample analysis time:
6-7min
4. Sample weighing
Recommended: 100-120mg
5. Test method
Cad: Optimized for low noise, non-dispersive infrared absorption method
Had: Optimized for low noise, non-dispersive infrared absorption method
Nad: Optimized for low drift, thermal conductivity detection method
6. Gas specifications required by experiments
Carrier gas: helium, purity higher than 99.996%, 0.25 ± 0.01MPa
Assistant gas: oxygen, only when carbon and hydrogen measured, the purity higher than 99.50%, when measuring nitrogen, purity higher than 99.995%, 0.25 ± 0.01MPa
Power gas: compressed air or nitrogen, must be free of oil and water, 0.25 ± 0.01MPa
7. Furnace type:
Resistance furnace, the maximum temperature 1050 ºC
8. Automatic sample-falling head:
30 samples loaded at one time
9. Power supply:
Detecting Power Supply: AC220V ± 22V, 50Hz, 2A
Heating unit: AC220V ± 22V, 50Hz, 20A
10. Host machine dimension (mm): 710×690×930
11. Host machine weight (kg): 120
Standard configuration of the instrument
CHN5000 Host machine 1 set
Lenovo/HP computer 1 set (Optional)
Printer 1 set (Optional)
Technical features
12. Set out 30 samples at one time, the instrument can automatically send samples, fall samples, experiment, test cycle, may increase or decrease and replace the sample at any time during the analysis.
13. Using PID temperature control, furnace temperature control accuracy can reach ± 1 ºC, thermostatic chamber and air storage tank temperature control accuracy can reach ± 0.1 ºC.
14. Use absolute pressure sensor for monitoring the whole gas line pressure of the instrument, automatic air tightness check to the whole gas line and furnace, infrared pool, thermal conductivity pool and air storage tank.
15. The instrument uses ultra-low drift infrared pool and thermal conductivity pool as the core component of elemental analysis, so that the experimental results are more accurate.
16. With unique airtightness detection device, can detect the tightness of the gas line in sections under the program control, determine the failure to a specific range. Convenient for gas line maintenance.
Parameters:
Supplied Sample Size: ≤13mm
Produced Sample Size: <3mm-1mm (XR-200×75, adjustable)
≤3-0.5mm (FTC-200×75, adjustable)
Productivity: 200kg/h
Motor Power: 1.5kw
Power Supply: 3-phase 380V
Weight: 230kg
Dimension: 640×455×875mm
Coal testing instruments:
Ash Fusion Tester
Ash and Volatile Matter Analyzer
Automatic Calorimeter (Removable Cover)
Automatic Calorimeter (Up and Down)
Automatic Proximate Analyzer (TGA)
Automatic Sulfur Analyzer
Chlorine Meter
Full Automatic Calorimeter
Full Automatic Microwave Moisture Analyzer
Full Automatic Proximate Analyzer
Full Automatic Sulfur Analyzer
Grindability Testing Machine
Integrated Hydrocarbon Tester
Integrated Sulfur Analyzer
Intelligent Muffle Furnace
Jaw Crusher
Microwave Moisture Analyzer
Moisture Tester
Monolithic Ash and Volatile Matter Analyzer
Normal Bomb Calorimeter
Online Coal Ash Analyzer
Portable Ash & GCV Tester
Sample Divider
Sealed Hammer Crusher
Sealed Sample Pulverizer
Sealed Wet Sample Crusher
Sieve Shaker
Synthesized Sampler
Twin-roll crusher
Audited Supplier 
){kind=link}