Item: Microcomputer Controlled Rolling Contact Fatigue Test Bench
Model: GPM-30
Application The microcomputer controlled rolling contact fatigue test bench is used to simulate the failure test of rolling contact parts such as bearings, rims, rolls, etc., applying a constant load to the rolling or rolling plus sliding contact specimens, so that the contact surface is subject to cyclic contact stress Role. By controlling and changing the parameters such as load, speed, slip rate, time, friction partner material, surface roughness, hardness and other parameters, the test is performed to evaluate the comprehensive use performance of the sample material. It meets the requirements of the standard GB10622-89 metal material rolling contact fatigue test method.
Working environment 1. At room temperature between 100°C and 350°C 2. Relative humidity shall not be more than 80% 3. Install correctly on a firm foundation 4. In a clean environment without vibration, corrosive media and strong electromagnetic interference 5. The fluctuation range of the supply voltage shall not exceed 10% of the rated voltage
Technical Parameters 1. Test force: 1.2 ~ 30kn 2. Relative error of test force indication: ≤ ± 1% 3. Relative error of displayed value when test force is maintained for a long time: ≤ ± 1% F.S 4. Maximum test torque: 20Nm 5. Relative error of torque indication: ≤ ± 1% 6. Test speed: 5 ~ 2000r / min stepless adjustable 7. Test time control range: 1s ~ 9999min 8. Test speed display and control range: 999999999 9. Test size: standard requirements 10. Test space: meet the clamping of friction pair 11. Servo motor power: 5kw (dual motor control) 12. Stop control mode: manual / automatic (time, test force, etc.) 13. External dimensions of the host: 1700x860x1230mm 14. The quality of the testing machine's electrical equipment, assembly quality and appearance should meet the relevant regulations of GB / T2611
Audited Supplier 
){kind=link}