Item: Solidifying Point Constant Temperature Water Bath
Model: PT-HWY-ND
Introduction:
This instrument is designed and made as per the sample processing requirements in GB/T 510 Standard Test Method for Solidifying Point of Petroleum Products. It is used to do the isothermal heat treatment to the sample at room temperature~60ºC.
I. Main technical features
1. Double shell structure. It has features of high heating speed, good heat prevention and saving energy.
2. Digital temperature controller and stirring motor make the temperature in the water bath uniform and stable.
II. Main technical specifications
1. Power supply: AC220V±10%, 50Hz±5%
2. Heating power: Two grades, 1000W+650W
3. Stirring motor: Power 6W, rate 1200r/min
4. Temperature range: Ambient +5ºC~100ºC
5. Temperature control precision: ±0.1ºC
6. Constant temperature bath: 20L, double shell
7. Working environment: Ambient -10ºC~+35ºC, RH <85%
8. Temperature sensor: Pt100, RTD
9. Maximum power consumption: 1800W
10. Dimension: 530*400*670mm (Bath is included)
PT-HWY-ND Water Bath for Solidifying Point Tester Accessories and Documents List
| No. |
Name |
Unit |
Qty |
Memo |
| 1 |
PT-HWY-ND Water Bath for Solidifying Point Tester
(Including inner and external glass cylinder, stirrer device, rubber ring etc.) |
Set |
1 |
|
| 2 |
Mercury thermometer (0~50ºC.50~100ºC)scale mark 0.1ºC |
Piece |
Each1 |
|
| 3 |
Sensor |
Piece |
1 |
|
| 4 |
Solidifying point tube |
Piece |
7 |
|
| 5 |
Cold filter point tube |
Piece |
2 |
|
| 6 |
Big fixing ring (for casing tube of solidifying test tube) |
Piece |
7 |
|
| 7 |
Fixing ring for solidifying point test tube |
Piece |
7 |
|
| 8 |
Small fixing ring for cold filter point test tube |
Piece |
2 |
|
| 9 |
Silica gel Stopper (3#) |
Piece |
2 |
|
| 10 |
Fuse 10A (Ф6×30) |
Piece |
4 |
|
| 11 |
Round glass |
Piece |
1 |
|
| 12 |
Stopping ring of thermometer (1#) |
Piece |
2 |
|
| 13 |
Plumb bob |
Piece |
1 |
|
| 14 |
Operation Manual |
Piece |
1 |
|
| 15 |
Quality Certificate |
Piece |
1 |
|
| 16 |
Repair Guarantee |
Piece |
1 |
|
Petroleum & Oil Analyzer Petroleum Testing Instruments
· Open Cup Flash Point Tester
· Flash & Fire Point Tester for Petroleum Products
· Closed Cup Flash Point Tester
· Engler Viscometer
· Water Content Tester
· Rotational Viscometer
· Kinematics Viscometer
· Distillation Tester
· Density Tester Rust and Corrosion Tester
· Sulphur Content Tester
· Acid and Alkali Tester
· Dropping Point Tester
· Demulsibility Characteristics Tester
· Ash Content Tester
· Aniline Point Tester
· Low Temperature Tester
· Residue Carbon Tester
· Existent Gum Tester
· Vapor Pressure Tester
· Petroleum Products Vapor Pressure Tester(Reid Methods)
· Bomb Calorimeter
· OCTANE & CETANE ANALYZER
· Lubricating Grease Steel Sieve Oil Separation Tester
Lubricating Oils Foaming Characteristics Tester
Naphthalene Crystallizing Point Tester
Petroleum Products Color Tester
Mechanical Impurity Tester (Weight method)
Crude Petroleum and Petroleum Products Salt Content Tester
Petroleum Wax Oil Content Tester
Automatic Interfacial Tension Tester
Automatic Multifunctional Degassing Oscillation Tester
Insulating Oil Breakdown Voltage Tester
Insulating Oil Volume Resistivity Tester
Liquid Petroleum Products Hydrocarbon Tester
Lubricating Oil Air Release Value Tester
Self-ignition Point Tester
Insulation oil proof pressure tester
Precision adsorption column cleanser
Fluorescent Indicator Absorption Apparatus
dean stark apparatus(water content)(single tube)
dean stark apparatus(water content)(double tube)
Petroleum Products and additives Mechanical impurities tester
Petroleum Products Saybolt color tester(Saybolt colorimetric method)
Engine coolant Foam characteristic tester (glassware Method )
Jet fuel Solid particulate pollutant tester
Apparatus for water separability of petroleum oils
apparatus for Rusting Characteristics of Oils
Lubricating Grease Pressure Oil Separating Tester
Cone and Needle Penetration for petroleum products
Oil Separation Apparatus for grease
Audited Supplier 
){kind=link}