Customization: | Available |
---|---|
Condition: | New |
Speed: | High Speed |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Maximum PCB size (X x Y) | 450mm x 350mm | |
Minimum PCB size (Y x X) | 50mm x 50mm | |
PCB thickness | 0.6mm~14mm | |
PCB warpage | Max.PCB diagonal 1% | |
Maximum board weight | 10Kg | |
Plate edge clearance | Up to 3mm | |
Maximum bottom clearance | 15mm | |
Transport speed | 1500mm/Sec(Max) | |
Transport height | 900±40mm | |
Transport direction | left to right,right to left,left to left,right to right | |
Transmission mode | 1-section rail guide | |
Clamping system | Elastic side clamping adjusted by software (Options: 1.Overall suction vacuum of the bottom; 2. multi-point suction vacuum of the bottom; 3. edge locking datum) | |
Support system | Magnetic thimble,Contour blocks,Special jig (Options: Grid-Lock) | |
Printing Parameters | ||
Print head | Linear motor closed-loop printing head | |
Screen frame | 370mm x 470mm~737 mm x 737 mm | |
Maximum printing area (X x Y) | 450mm x 350mm | |
Squeegee type | Steel,plastic,angle:45°/55°/60°(according to the printing process matching choice) | |
Squeegee Length | 220~500mm | |
Squeegee Height | 65±1mm | |
Squeegee Thickness | 0.25mm diamond-like carbon coating | |
Print Mode | Single or double squeegee printing | |
Snap-off length | 0.02 mm - 12 mm | |
Printing speed | 0- 200 mm/Second | |
Printing pressure | 0.5kg - 10Kg | |
Printing stroke | ±250 mm(from central) | |
Image Parameters | ||
Imaging horizon (FOV) | 6.4mm x 4.8mm | |
Table adjustment range | X,Y:±7.0mm,θ:±2.0°. | |
Fiducial type | Standard shape (SMEMA Standard),Pad/Tapping | |
Camera system | Independent Camera,up/down single imaging visual system,geometric match | |
Performance Parameters | ||
Calibration repeat precision | ±12.5micron (±0.0005") @6 σ,Cp ≥ 2.0 | |
Printing repeat accuracy | ±25 micron (±0.001") @6 σ,Cp ≥ 2.0 | |
Cycle time | Less than 7second | |
Changeover time | Less than 5 minutes | |
Equipment | ||
Power requirement | AC220V±10%,50/60HZ,15A | |
Compressed air requirement | 4~6Kg/CM2, 10.0 Diameter tube | |
Operating system |
|
|
Machine dimension | 1140mm x 1400mm x 1480mm | |
Machine weight | 1000Kg | |
Temperature and Humidity Control Module (Optional) | ||
Environmental Temperature | 23±3ºC | |
Relative Humidity | 45~70%RH4 |