Application The vertical universal friction wear tester can realize the friction simulation test between different friction pairs under various conditions such as changing temperature, load, speed, friction pair materials, friction pair surface roughness, hardness, and changing the lubrication state (no oil lubrication, drip lubrication or immersion lubrication)
The vertical universal friction wear tester can simulate the friction forms of rolling, sliding, and rolling compound motion. It has a variety of friction pairs, such as pin discs (with large and small discs, single needle and three needles) friction pairs, and four ball friction pairs , thrust circle, ball and so on. It can complete a variety of point, line, surface friction simulation experiments. and it can be used to evaluate the friction simulation performance of lubricants, metals, coatings, coatings, rubber, ceramics and other materials.
The vertical universal friction wear tester is suitable for various professional fields of tribology. It can meet the needs of users of various industries in petrochemical, mechanical, energy, metallurgical, aerospace and other tribological research. Development, new technology research and other friction and wear testing of pharmaceutical companies library.
Technical Parameters 1. Axial loading range: 10 ~ 1000N 2. Relative error of axial test force: ± 1% 3. Relative error (30min) during long test force: ± 1% FS 4. Maximum friction torque: 2500N.mm 5. Relative error of friction torque: ± 2% 6. Friction arm length: 50mm 7. Spindle motor type: Servo motor 8. Maximum output torque of motor: 5N.m 9. Spindle speed: 1 ~ 2000r / min (steplessly adjustable) 10. Spindle speed error: ± 1r / min below 100r / min; ± 5r / min above 100r / min 11. Test medium: air, oil, water, mud, abrasive, etc. 12. Heater heating range: room temperature ~ 260 ° C 13. Temperature control accuracy: ± 2 ° C 14. Stop control mode: manual / automatic (time, revolutions, friction torque, etc.)
Audited Supplier 
){kind=link}