| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Item: Powder bulk density meter
Model: HTD-16913
Introduction
HTD-16913 is designed and produced based on GB/T 16913.3-199.it is application to measuring bulk density of powder.
Principle
The powder drop from high place freely and fill with measuring cylinder; By measuring the gram mass and volume in the status of loose. can get bulk density.
Structure
1.Funnel(diameter of outflux 12.7mm)
Stainless steel funnel(304), 60°±0.5° taper
2.Obstructed rod
Stainless steel(304),to prevent the dust drop when placed into funnel
3.Measuring cylinder
100ml stainless steel(304) measuring cylinder.inner diameter Φ39mm
4.Scraper blade
Stainless steel(304),to remove the extra dust when it is droped into funnel
Measuring step
1. Test the weight of the empty stainless steel measuring cup m1
2. Block the funnel with a plugging bar and weigh some powder into the funnel.
3. Unplug the plug and let the powder free downstairs until the powder completely overflows the measuring cup
4. Squeeze the excess powder of the measuring cup with a stainless steel ruler, and then weigh the weight of the measuring cup and the powder at this time.
5. Calculate the bulk density of the powder according to the formula: ρ = (M2-M1) / V Remarks: V-corrected cylinder volume, 100 cm3.
Remarks: The difference between the maximum and minimum values of the dust quality measured for three consecutive times should be less than 1g, and the average of the three measurements that meet the requirements is taken as the measurement result.
Standard configuration
Density meter
Blocking rod
Cylindrical measuring cup
Scraper
Brus
){kind=link}