Item: Gasoline Oxidation Stability Tester (Induction Period Method)
Model: PT-XH-123A
Introduction:
This instrument is used to test the oxidation stability of gasoline special equipment, with a reasonable structure, convenient operation, high precision temperature, pressure recorder uses the most advanced intelligent electronic digital paperless loggers, are the latest generation of products, the use of a dual channel display, reliable performance, wide range, high precision, large memory data capacity, and can be transmitted through the U disk to collect data logger to a PC for analysis.
At the same time supporting a high-precision instrument pressure transmitter, with high precision pressure, stable performance, so that the measured data is accurate to several decimal places, which is the product of the highest technological content.
The instrument chose bath and cover made of stainless-steel plate, durable, and in order to make the bath temperature accurate, especially the addition of 1500 rev / min stirring motor. For the convenience of the user, the instrument on the table, the new addition of the handling bomb racks, and added a transparent glass tube in left, in order to observe the level of liquid inside bath.
Samples oxidized in an oxygen bomb, this bomb oxygenation oxygen to 689 kPa at 15 ~ 25 ºC, and then heated to between 98 ~ 102 ºC, in accordance with a predetermined time interval to read pressure or continuous recording pressure until it reaches a turning point sample, time needed to reach the turning point is the test temperature measured induction period, thus measured induction period can be calculated during the induction period 100 ºC.
Related defined as follows:
1. The turning point: the point in pressure - time curve, is the point that in less than 15 minutes pressure drop of 13.8 kPa, and next following 15 minutes the pressure drop is not less than 13.8 kPa begins to drop.
2. The induction period: time from the oxygen bomb placed in 100 ºC bath to the turning points, in minutes.
Technical Specifications
| Description |
Parameters |
| The power supply voltage |
AC 220V ± 10% 50Hz |
| Heating power |
2.5KW |
| Temperature range |
Room temperature ~ 100 ºC |
| The test hole |
2 holes |
| Stirring motor |
220V, 15W, 1500 rev / min |
| Recorder: Robert BT800 intelligent paperless electronic digital automatic recorder, dual-channel, 1.6Mpa (detailed technical parameters supporting the logger manual) |
| Ambient temperature |
Room temperature about 25 ºC |
| Relative humidity |
<= 85% |
Petroleum & Oil Analyzer Petroleum Testing Instruments
· Open Cup Flash Point Tester
· Flash & Fire Point Tester for Petroleum Products
· Closed Cup Flash Point Tester
· Engler Viscometer
· Water Content Tester
· Rotational Viscometer
· Kinematics Viscometer
· Distillation Tester
· Density Tester Rust and Corrosion Tester
· Sulphur Content Tester
· Acid and Alkali Tester
· Dropping Point Tester
· Demulsibility Characteristics Tester
· Ash Content Tester
· Aniline Point Tester
· Low Temperature Tester
· Residue Carbon Tester
· Existent Gum Tester
· Vapor Pressure Tester
· Petroleum Products Vapor Pressure Tester(Reid Methods)
· Bomb Calorimeter
· OCTANE & CETANE ANALYZER
· Lubricating Grease Steel Sieve Oil Separation Tester
Lubricating Oils Foaming Characteristics Tester
Naphthalene Crystallizing Point Tester
Petroleum Products Color Tester
Mechanical Impurity Tester (Weight method)
Crude Petroleum and Petroleum Products Salt Content Tester
Petroleum Wax Oil Content Tester
Automatic Interfacial Tension Tester
Automatic Multifunctional Degassing Oscillation Tester
Insulating Oil Breakdown Voltage Tester
Insulating Oil Volume Resistivity Tester
Liquid Petroleum Products Hydrocarbon Tester
Lubricating Oil Air Release Value Tester
Self-ignition Point Tester
Insulation oil proof pressure tester
Precision adsorption column cleanser
Fluorescent Indicator Absorption Apparatus
dean stark apparatus(water content)(single tube)
dean stark apparatus(water content)(double tube)
Petroleum Products and additives Mechanical impurities tester
Petroleum Products Saybolt color tester(Saybolt colorimetric method)
Engine coolant Foam characteristic tester (glassware Method )
Jet fuel Solid particulate pollutant tester
Apparatus for water separability of petroleum oils
apparatus for Rusting Characteristics of Oils
Lubricating Grease Pressure Oil Separating Tester
Cone and Needle Penetration for petroleum products
Oil Separation Apparatus for grease
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}