| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Item: Lubricating Oils Foaming Characteristics Tester
Model: PT-SYD-12579
The instrument is designed and made as per standards GB/T12579 Determination of foaming characteristics of lubricating oils and ASTM D 892 Standard Test Method for Foaming Characteristics of Lubricating Oils. It is used to determine the foaming tendency and stability of lubricating oils.
I. Main technical features
1. This instrument used in a one-piece structure, including three parts: low temperature constant temperature part and control part, high temperature and constant temperature part and control part. Low temperature constant temperature section is equipped with a matching portable refrigerator.
2. Instrument set temperature point after, will be automatically entered into a state of constant temperature. Temperature control with parameter correction function, if the displayed temperature and the temperature of the thermometer measurement deviation, can be modified to achieve the required test temperature.
3. Instrument has automatic timing alarm function, after achieve constant temperature point, open the timer switch, the timer will automatic timing, began to blow at the same time, after 5 minutes, blowing will automatically shut off, and still place 10 minutes, 10 minutes later, the instrument will automatically alarm, said the end of the test sample.
II. Main technical specifications
1. Power supply: AC (220±10%) V, 50Hz
2. Constant temperature heating power: 650W
3. Auxiliary heating power: 1000W
4. Cooling power: 500W
5. Air flow rate: (94±5) ml/min, adjustable
6. Temperature control range for high temperature bath: (Room temp.~99.9) ºC
7. Temperature control range for low temperature bath: (5~99.9) ºC
8. Temperature control accuracy: ±0.5ºC
9. Timer: 5min and 10min, accurate to second
10.Timing accuracy: 0.01%+0.05s (20ºC)
11.Ambient temperature: (-10~+40) ºC
12.Relative humidity: ≤85%
13.Maximum power consumption: 2700W
14.Dimension: Main unit: 690mm*460mm*700mm
Cooler:400mm×450mm×300mm
PT-SYD-12579 Foaming Characteristic Tester Accessories and Documents List
| No. | Name | Unit | Qty | Memo |
| 1 | PT-SYD-12579 Foaming Characteristic Tester | Set | 1 | High and low temperature bath each 1 piece |
| 2 | Portable cooler | Set | 1 | Including usage manual |
| 3 | Graduated flask | Piece | 4 | 1000ml |
| 4 | Thermometer (-20ºC~102ºC, scale division is 0.2ºC) | Piece | 1 | |
| 5 | Foaming head | Piece | 4 | |
| 6 | Cork for graduated flask | Piece | 4 | |
| 7 | Drying tower | Piece | 2 | Installed on the instrument |
| 8 | Fasten device for the cover of drying tower | Piece | 2 | Installed on the instrument |
| 9 | Rubber tube | Meter | 2 | |
| 10 | Fuse 10A (Ф5×20) | Piece | 2 | |
| 11 | Fuse 5A (Ф5×20) | Piece | 2 | |
| 12 | Sensor | Piece | 2 | |
| 13 | Rubber stopper for thermometer | Piece | 2 | |
| 14 | Stopping ring for thermometer (1#) | Piece | 6 | |
| 15 | Fixing ring for graduated flask | Piece | 4 | "O" type ring (Ф56×5.3) |
| 16 | Operation Manual | Piece | 1 | |
| 17 | Quality Certificate | Piece | 1 | |
| 18 | Repair Guarantee | Piece | 1 |
| No. | Name | Specification | Quantity | Memo |
| 1 | Methylbenzene | Analytical pure 500ml | 3 bottles | |
| 2 | Acetone | Analytical pure 500ml | 3 bottles | |
| 3 | Petroleum ether 30-60°C | Analytical pure 500ml | 3 bottles | |
| 4 | Miscella | 1 bottle | ||
| 5 | Distilled water | 3 grades | 1 litre | |
| 6 | Allochroic silicagel | 500g | 1 box | |
| 7 | Socket | 16A | 1 piece |
Notes:
1.The reagent and equipment for installing the instrument are supplied by end-users themselves.
2.The usage, management and saving of poisonous and harmful reagent, pls operate according to the relative principle.
3.PLS read the operation manual and industry standard before using the instrument
Petroleum & Oil Analyzer Petroleum Testing Instruments
· Open Cup Flash Point Tester
· Flash & Fire Point Tester for Petroleum Products
· Closed Cup Flash Point Tester
· Engler Viscometer
· Water Content Tester
· Rotational Viscometer
· Kinematics Viscometer
· Distillation Tester
· Density Tester Rust and Corrosion Tester
· Sulphur Content Tester
· Acid and Alkali Tester
· Dropping Point Tester
· Demulsibility Characteristics Tester
· Ash Content Tester
· Aniline Point Tester
· Low Temperature Tester
· Residue Carbon Tester
· Existent Gum Tester
· Vapor Pressure Tester
· Petroleum Products Vapor Pressure Tester(Reid Methods)
· Bomb Calorimeter
· OCTANE & CETANE ANALYZER
· Lubricating Grease Steel Sieve Oil Separation Tester
Lubricating Oils Foaming Characteristics Tester
Naphthalene Crystallizing Point Tester
Petroleum Products Color Tester
Mechanical Impurity Tester (Weight method)
Crude Petroleum and Petroleum Products Salt Content Tester
Petroleum Wax Oil Content Tester
Automatic Interfacial Tension Tester
Automatic Multifunctional Degassing Oscillation Tester
Insulating Oil Breakdown Voltage Tester
Insulating Oil Volume Resistivity Tester
Liquid Petroleum Products Hydrocarbon Tester
Lubricating Oil Air Release Value Tester
Self-ignition Point Tester
Insulation oil proof pressure tester
Precision adsorption column cleanser
Fluorescent Indicator Absorption Apparatus
dean stark apparatus(water content)(single tube)
dean stark apparatus(water content)(double tube)
Petroleum Products and additives Mechanical impurities tester
Petroleum Products Saybolt color tester(Saybolt colorimetric method)
Engine coolant Foam characteristic tester (glassware Method )
Jet fuel Solid particulate pollutant tester
Apparatus for water separability of petroleum oils
apparatus for Rusting Characteristics of Oils
Lubricating Grease Pressure Oil Separating Tester
Cone and Needle Penetration for petroleum products
Oil Separation Apparatus for grease
){kind=link}