| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Item: Heat insulation retort kit drilling mud tester
Model: HY-20
The instrument is used to separate and measure the volume of water, oil and solid phase in water-based drilling fluid samples. The instrument adopts external heating distillation method, quasi-capacity distillation, taking 20ml of quantitative drilling fluid heated by high temperature, separating oil and water and condensing and dropping into the scale cylinder to calculate the mass or volume percentage of oil water and solid phase, due to the external heating The test accuracy is improved compared to conventional heating rod heating. The dry burning (overheating) formed by internal heating is avoided. The instrument is easy to operate and can be used both in the laboratory and on site. It is the basis for understanding the solid phase concentration and composition of water-based drilling fluid viscosity and fluid loss control. The utility model has the advantages of simple structure and convenient operation, and is a special instrument suitable for the laboratory and the field.
Product advantages
1) Use external heating distillation to avoid dry burning (overheating) caused by internal heating.
2) Built-in heating rod, the grounding wire can maximize the avoidance of burns.
3) Personalized configuration
Technical parameters
| Rated Frequency | 220V 50Hz |
| Power | 400W |
| Distiller capacity | 20±0.2ml |
| Liquid recovery | >98% |
| Maximum heating temperature | >110MΩ |
){kind=link}